Dynamic toughness: fracture mechanics interpretation of the drop-weight (NDT) test = Ténacité dynamique: évaluation à l'aide de la mécanique de la rupture de l'essai PelliniTYSON, W; HARBEC, J.International journal of fracture. 1984, Vol 25, Num 2, pp 133-141, issn 0376-9429Article

Analysis of single particle impact breakage characteristics of raw and HPGR-crushed cement clinkers by drop weight testingGENC, Ö; BENZER, A. H; ERGÜN, S. L et al.Powder technology. 2014, Vol 259, pp 37-45, issn 0032-5910, 9 p.Article

Fallversuche auf dem Prüfstand = Drop tests on test stand - investigation referring to EN 22 248SPERBER, A; ROMBERG, H; SCHLEHLEIN, S et al.Materialprüfung. 1995, Vol 37, Num 9, pp 352-356, issn 0025-5300Article

Design and testing of a shock absorber for a type I containerSAPPOK, M; BEINE, B; RITTSCHER, D et al.Nuclear engineering and design. 1994, Vol 150, Num 2-3, pp 459-463, issn 0029-5493Article

Mécanisme de rupture par impact d'un acier traité par TuffridingSUGIYAMA, Y; ASAMI, K; TERASAWA, M et al.Zairyo. 1985, Vol 34, Num 381, pp 633-637, issn 0514-5163Article

Mechanics of static and dynamic inversion processesMISCOW F., P. C; AL-QURESHI, H. A.International journal of mechanical sciences. 1997, Vol 39, Num 2, pp 147-161, issn 0020-7403Conference Paper

Determination of dynamic fracture toughness of heat affected zone of 9Cr-1 Mo steel from instrumented drop weight testsMOITRA, A; RAY, S. K; MANNAN, S. L et al.Materials science and technology. 1999, Vol 15, Num 2, pp 137-143, issn 0267-0836Article

Abnormal fracture appearance in drop-weight tear test specimens of pipeline steelZHENG YANG; KIM, Chang-Boo; YAORONG FENG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 483-84, pp 239-241, issn 0921-5093, 3 p.Conference Paper

A dropped-weight apparatus for low-speed impact testing of composite structuresAMBUR, D. R; PRASAD, C. B; WATERS, W. A et al.Experimental mechanics. 1995, Vol 35, Num 1, pp 77-82, issn 0014-4851Article

CRACK ARREST PROPERTIES OF 9% NICKEL STEEL AT LOW TEMPERATURE. II: INTERPRETATION OF RESULTS = CARACTERISTIQUES D'ARRET DES FISSURES D'ACIERS A 9% DE NICKEL A BASSE TEMPERATURE. II: INTERPRETATION DES RESULTATSKAMATH MS; WOOD AM.1981; MET. CONSTR.; ISSN 0307-7896; GBR; DA. 1981; VOL. 13; NO 10; PP. 625-627; LOC. ISArticle

DAS SPROEDBRUCHKONZEPT NACH PELLINI UND DIE GRENZEN SEINER ANWENDBARKEIT = THE BRITTLE FRACTURE CONCEPT ACCORDING TO PELLINI AND ITS LIMITS OF APPLICATION = LA THEORIE DE LA RUPTURE FRAGILE SELON PELLINI ET LES LIMITES DE SON UTILISATIONFROMM K; SCHULZE HD.1980; SCHWEISSEN+SCHNEIDEN; ISSN 0036-7184; DEU; DA. 1980; VOL. 32; NO 10; PP. 416-420; ABS. FRE/ENG; BIBL. 16 REF.; LOC. ISArticle

Impact Resistance of Polyurea-Coated High-Performance Cementitious CompositesHYUNGJOO CHOI; TOUTANJI, Houssam A; GILBERT, John A et al.Journal of materials in civil engineering. 2013, Vol 25, Num 12, pp 1984-1989, issn 0899-1561, 6 p.Article

New experimental set-up to approach pipeline fracture behaviour by three-point bending specimensMINOTTI, M; SALVINI, P.Fatigue & fracture of engineering materials & structures (Print). 2012, Vol 35, Num 6, pp 572-593, issn 8756-758X, 22 p.Article

DAS SPROEDBRUCHKONZEPT NACH PELLINI UND DIE GRENZEN SEINER ANWENDBARKEIT = PELLINIS BRITTLE FRACTURE CONCEPTION AND ITS APPLICATION LIMITSFROMM K; SCHULZE HD.1980; SCHWEISSEN + SCHNEIDEN; ISSN 0036-7184; DEU; DA. 1980-10; VOL. 32; NO 10; PP. 416-420; BIBL. 16 REF.Article

VYSLEDKY VYSKUMU PRI ZAVADZANI SKUSKY DWTT NA HODNOTENIE OCELI NA SPIRALOVO ZVARANE RURY. = RESULTATS D'UNE ETUDE SUR L'EMPLOI DE L'ESSAI PELLINI POUR L'EVALUATION DES ACIERS DESTINES A LA FABRICATION DE TUBES SOUDES EN SPIRALEHIDVEGHY J; BURSAK M; SIMON A et al.1978; ZVARANIE; CSK; DA. 1978; VOL. 27; NO 6; PP. 165-169; ABS. ENG/GER/RUS; BIBL. 8 REF.; LOC. ISArticle

COMPARISON OF CRACK STARTERS IN DROPWEIGHT TESTING OF STRAINED MATERIAL. = COMPARAISON ENTRE LES DEMARREURS DE FISSURES PAR ESSAIS PELLINI SUR MATERIAUX DEFORMESFLETCHER L.1975; AUSTRAL. WELDG RES.; AUSTRAL.; DA. 1975; VOL. 4; NO 2-4; PP. 47-48; BIBL. 2 REF.Article

Impact Performance of Magnetorheological FluidsBROWNE, Alan L; MCCLEARY, Joseph D; NAMUDURI, Chandra S et al.Journal of intelligent material systems and structures. 2009, Vol 20, Num 6, pp 723-728, issn 1045-389X, 6 p.Article

Design of skid landing gears by means of multibody optimizationAIROLDI, Alessandro; LANZI, Luca.Journal of aircraft. 2006, Vol 43, Num 2, pp 555-563, issn 0021-8669, 9 p.Article

Dynamic calibration of impact test instrumentsTOROPOV, A. I; GROSSO, M.Journal of testing and evaluation. 1998, Vol 26, Num 4, pp 315-319, issn 0090-3973Article

The simplified determination of drop-weight-test NDTLEI, W; YAO, M.Engineering fracture mechanics. 1996, Vol 55, Num 1, pp 25-33, issn 0013-7944Article

Identification des mécanismes d'endommagement dans des plaques composites soumises à des impacts localisés de faible ou moyenne énergie = Identification of damage mecanisms in composite plates under localised low or high energy impact loadingsMartin-Llorca Martin, Valérie; Lataillade, J.-L.1995, 203 p.Thesis

Analyse comparée de la réponse de plaques stratifiées composites au poinçonnement statique et à l'impact basse vitesse = Comparison analysis of the behaviour of laminates under static indentation and low velocity impact loadingsCOLLOMBET, F; BONINI, J; AUZANNEAU, T et al.Mécanique industrielle et matériaux. 1995, Vol 48, Num 2, pp 96-98, issn 1244-9091Conference Paper

Qualification du mode opératoire en soudage par faisceau d'électrons = Procedure qualification of electron beam weldingGAILLARD, R; GOUSSAIN, J. C.Strahltechnik. Internationale Konferenz. 1985, pp 162-165Conference Paper

Drop test and analysis on micro-machined structuresLI, G. X; SHEMANSKY, F. A.Sensors and actuators. A, Physical. 2000, Vol 85, Num 1-3, pp 280-286, issn 0924-4247Conference Paper

Drop test of IP-2 packaging for LLW transportKARIGOME, S; MATSUURA, Y; HIRATA, Y et al.International conference on the packaging and transportation of radioactive materials. 1998, pp 1632-1638, 4VolConference Paper